Diagnostics

Diagnostics Box Demystified

7M-GE Throttle Position Sensor (TPS) - mounting and alignment information

MAFT Pro

Wiring Diagrams

MAFT Pro 4.80 Online Guide

MAFT Pro 5.x Online Guide

7M-GE MAF Install

7M-GE S/D Install (Coming... sooner or later)

7M-GE Timing Control Setup (Coming... sooner or later)

7M-GE Fuel Cut Safety (FC) Switch

MAFT Pro and TCCS Error Codes - 7M-GTE and 7M-GE Error Code Fixes

MAFT Pro and TCCS Error Codes (cont'd) - Pre-powering the MAFT Pro and Wideband

The official MAFT Pro Manual (version 1.0, for firmware ver.4.40 and later) This is rather dated, but it contains a LOT of helpful information.

The official MAFT Pro Manual (version 1.5, for firmware ver.5 and later) This is current version; It contains a LOT of helpful information. I strongly recommend you read through this before proceeding with my online guide.

Firmware version 5.2e for MAFT Pro, repacked with the ADS and XDF files.

Delphi Automotive Systems' datasheet for their 3 bar (GM compatible) MAP sensor. This provides physical and electrical specs.

General Reference

A reference chart for those of you who are not familiar with reading resistor color codes. This doesn't include all the values of resistors made, these are the most common values known as the E12 series (10% tolerance, gold band). These are the values you are most likely to find in Radio Shack.

Resistor values for converting 7M tachometers from GE to GTE and visa versa.